Tiling Service

Tiling A Floor

December 3, 2022 by admin

DIY Floor Tiling in Singapore

In Singapore, one of the most basic home improvement projects is tiling a floor. The process involves putting down adhesive, laying tile, and sealing the grout. Before you start, it’s important to understand the various steps of the project. Doing so will allow you to avoid potential problems and achieve the desired outcome.

Most people who have tackled a tiling project are proud of the work they have done, but they would agree that it would have looked better if it had been done by a professional tile contractor.

Also, most people also admit that the process took longer than they initially thought. In the end, it didn’t save them much money. One important thing to remember when it comes to tiling is that it takes a certain amount of skill to tile a floor. Having a professional installer take care of the tiling service is highly recommended for the first time.

For home improvement, you might be interested in: Carpentry Service | Benefits of Choosing a Good Carpenter

Steps To Tile A Floor

There are a few steps in tiling a floor, you will need to prepare the materials for floor tiling before getting started.

1. Prepare Thinset and Lay on the Floor

Follow the manufacturer’s instructions and mix your thinset according to the instructions. Do your best to avoid over-mixing and damaging the pigment. Using your notched trowel, lay a bed of mortar over the floor at a 45-degree angle. Continue to spread this mixture until you have installed a couple of tiles. Make sure to lay the tile down on top of the mortar to ensure adhesion.

Make sure to level the tiles using your level. You can also make adjustments using light taps. One important step is to ensure that there are no gaps between the tiles. This will be crucial once more tiles are added. To ensure that the appropriate space is between the two, use tile spacers.

These are usually easy to work with and will leave a perfect space. They should not be mortared into the joints, and they can be used for larger formats. For larger tiles, we recommend using leveling or wedge-type mechanisms. These are designed to pull adjacent tiles to a flush finish height and eliminate the high lows.

Although these are usually recommended for larger sizes, they are also good for smaller formats, such as 18 x 18. To prevent any mortar from squeezing out, make sure to clean it immediately. This process can be challenging once dried, so make sure to get it off the tile’s edges. After this, lay the mortar over the floor, level the tile, and then place the spacer over the desired area.

2.Cut Tiles to Fit in the Edges

Contrary to popular belief, it is not as easy to cut tile as it seems. You can take your time and wear safety glasses. Before you start tiling, make sure that you lay mortar on the tile that you are planning on cutting. Doing so will prevent it from drying out before you can start setting the tile.

Measure out your tile and cut it into a space that you can fit into. Then, dry fit it and mortar it in place. If you have to make cuts, you can use a tile saw or a tile cutter. Before you start cutting, mark the tile where you want it to be cut. Place it inside the tile cutter, and be careful handling it as it will most likely be sharp.

Before you start tiling, make sure that you lay mortar on the tile that you are planning on cutting. Doing so will prevent it from drying out before you start setting the tile. After you have thoroughly dried the cut tile, make sure that it is fit into the space that you are planning on using it. If the mortar won’t fit in the space that you are planning on using it, then use your hands to apply it to the back of the tile.

Back buttering is a type of tiling that involves laying mortar on the tile that you are planning on using. Doing so will prevent it from drying out before you start setting the tile. If you use this method, make sure that you do not stick it to the back as it will leave hollow points underneath it. A curved cut is generally treated the same as a regular one.

Before cutting the tile, make sure that you have measured the area where you want it to be installed. Then, mark the cut line using a tool known as a contour gauge. Curve cuts are usually done using an angle grinder or a diamond hole saw.

Although a snap tile cutter cannot produce curve cuts, you can still make them using a wet saw. After carefully turning the tile, keep the curve line parallel to the blade as needed. For less-cosmetic curves, you can use your nippers to remove excess material. Make sure that you have smoothened the edges to avoid any sharp edges. You can install the tile as you would a straight one.

3. Tile Spacer Removal

After all of the tiles have been installed, it’s time to remove the tile spacer. Before you start grouting, make sure that all of the tile spacers are out of the way. Also, make sure to clean any dried mortar that’s left in the joints.

4. Grout Between the Tiles

When you fill in the spaces between your tiles, you’re adding a bit of character to the final flooring. With the help of adhesive, you can easily hold the tiles in place with just a touch of grout. Choosing the right color of grout can make your final floor look more like your home’s original color. For instance, if you have a stone or wood look tile, choose a grout that closely resembles the main color.

For a simple and elegant look, choose a grout that is similar to the color of your tile. This can unify the installation and add a modern and geometric element to your floor. A low contrast grout adds a subtle and understated effect to your floor tile. A vibrant color can also contrast with white lines. Mix the recommended grout according to the manufacturer’s instructions.

To apply the grout, use a grout float and press it into the seams between your tiles. Make sure to fill all the spaces and come back across them at a certain angle to remove as much as possible. Doing so will allow you to remove the excess grout without having to re-grout the areas. After you’ve applied the grout, use a grout sponge to remove it from the tile face. You can also use a bucket of water to smooth the seams.

To avoid over-wetting the grout joints, apply a sponge at an angle and make sure that it doesn’t get too wet. You should also avoid over-pressure while doing this as it can cause the grout to “grout haze.” You must keep agitating and wringing the sponge until all the excess is out, and repeat the process until the remaining grout is gone.

5. Clean up After Tiling

After you done tiling a floor, make sure that you thoroughly clean your tools and remove the excess grout. You should also keep traffic off the tile according to the manufacturer’s instructions. Once this has happened, you can start working on the outside edges of the tile. You can use a variety of types of grouts to match the colors in your project. Some of these include both unsanded and sanded options. Color-matched silicone grout is ideal for wet areas. Once the curing time has finished, you can apply the recommended grout sealer.

A good color match silicone sealant can be used for wet areas, such as bathrooms. Before you start working on the grout, let it cure completely. The curing time for the manufacturer’s recommended sealant is typically around two to three weeks. Once the curing period has finished, you can use the sealant.

Some products come in a sponge roller bottle, which you can use to run through the grout lines. You can ask your friends for assistance if you prefer. After you’ve sealed the grout, the floor will look like new.

Tile Contractor

November 20, 2022 by admin

Tile Contractor

How To Find The Right Tile Contractor for Your Project

Tile contractor is the expert in installing different types of tiles. They use special tools to cut and fit the tiles into place during tiling services.

Before Hiring Tile Contractors:

1. Understand what type of project you need done

Before hiring a tile contractor, make sure you understand exactly what kind of job needs to be done. You should also ask them questions about how they work and what materials they will use.

Some direct tile contractors are more focused on wall and floor tiling. Others are main contractors that will sub out the tiling work to another subcontractor.

Useful Links: Carpenter Singapore | Plumber Singapore

2. Choose a contractor based on their reputation

Ask friends and family members for recommendations. You can also check their online reviews. Nowadays, most of the clients will read the Google Reviews before they engage.

If it is a big renovation work, make sure the company has insurance and workers compensation coverage. For HDB homeowners, make sure the company is licensed and listed under the directory of HDB renovation contractor.

3. Ask questions about the tiling process

Before hiring a tile contractor, ask them how they plan to complete the project. Do they use subcontractors? What type of materials will they use? Will they do the installation themselves or hire others? If they plan to use subcontractors, find out what kind of training they have received.

Asking questions will help you better estimate the project timeline and the quality of work you will expect. This is useful when you are dealing with different contractors at the same time.

You might be interested in different types of tiles:

Types of Tiles in Tiling Service

admin

•

November 12, 2022

•

Tiling Service

Types of Tiles in Tiling Service While searching for ideas using different types of tiles for your bathroom, you might come across several images of glamorously-tiled master baths, powder rooms, or lavatories. While it’s important to consider the various options when it comes to choosing a tile for your bathroom, it’s also important to note […]

4. Determine how much money you will spend

Once you have determined the type of project you need completed, determine how much money you are willing to spend. This includes both the cost of the material and labour. If you are unsure of the price, contact several contractors to find out what they charge.

A higher price does not guarantee higher quality. Likewise, a lower price does not compromise the quality of tiling work. Find out what they include in their tiling package before you make the decision.

5. Be prepared to pay more than expected

You should expect to pay more than you think when hiring a tile contractor. It’s not unusual for contractors to charge higher prices because they need to cover overhead costs.

In addition, some contractors charge extra fees for additional services such as removing old tiles or installing grout lines. Thus, it is always good to discuss beforehand with your tile contractor before you proceed. Most tile contractors offer on-site viewing before they quote.

Still unsure how to start your tiling project?

Feel free to contact us to find out more!

In the meantime, you can take a look at our BTO Tiling Package.

Benefits of Tiling Service

admin

•

September 10, 2022

•

Tiling Service

Benefits of Tiling Service Tiling is an excellent method to enhance the beauty and value of your property. Tiles come in various designs, colors, textures, and materials. They’re versatile enough to be used everywhere, from walls to ceilings, from bathrooms to kitchens. Tiling is an art that demands accurate measurements, exceptional quality, and meticulous attention […]

Types of Tiles in Tiling Service

November 12, 2022 by admin

Types of Tiles in Tiling Service

While searching for ideas using different types of tiles for your bathroom, you might come across several images of glamorously-tiled master baths, powder rooms, or lavatories.

While it’s important to consider the various options when it comes to choosing a tile for your bathroom, it’s also important to note that there are many different materials that can be used to make tile.

One of the most important factors that you can consider when it comes to improving your home is the addition of new flooring with tiling service. Not only will it give your house a more prominent and attractive look, but it will also provide you with a better return on your investment.

Whether you are planning on adding a new tile floor to your kitchen or a new subway tile to your walk-in shower, the natural beauty of tile will help keep your walls and floors looking their best.

Types of Tiles in Singapore

When it comes to planning a renovation for your HDB flat in Singapore, one of the most important factors that comes to mind is the flooring.

There are a variety of styles and designs that are available in the market, and it can be a daunting task to choose the right one. However, before you start the process, it’s important to note that each tile has its own characteristics.

Looking for an experienced carpenter in Singapore?

1. Ceramic Tiles

Unlike other types of flooring, ceramic tiles do not attract dust, pollen, and dirt. When these tiny particles stick to the surface, they can easily be wiped away with a sponge or mop. This helps keep the air free of harmful materials, which can trigger allergic reactions in people with asthma.

Ceramic tile is a versatile and popular choice when it comes to home improvement projects due to its numerous applications. Its durability and affordability make it an ideal choice for various rooms in your house, such as the kitchen, bathroom, and front entrance.

Compared to other types of flooring, such as carpet, hardwood, or vinyl plank, glazed ceramic tile is more durable and stain-resistant. It’s ideal for kitchens and bathrooms, as well as areas with high traffic.

In warm climates, tile can be used in various rooms of a home, such as bedrooms and living areas. This type of flooring is durable and elegant, and it can be hard to install, especially for those who are new to it.

2. Porcelain Tile

Clay ceramic tile is known as porcelain, which is a finer type of tile. It is made of a higher ratio of quartz and silica, and it is more durable than its red counterparts. Its various patterns and colors can make it a chameleon-like material.

Although it can look like industrial bricks, hardwood planks, or marble, it can also be a bit challenging to install due to its strength and density. In addition, it requires a special tool, such as a diamond blade wet saw.

Unglazed or homogeneous porcelain tiles are commonly used in bathroom and kitchen renovations. These are made of specialized materials and can withstand high temperatures, such as those that can reach up to 1500 degrees Celsius.

Due to their water resistance and strength, these tiles are often utilized in projects that involve tiling. Since they do not show signs of wear or chip, it is recommended to choose these types of tiles over glazed ones.

3. Glass Tile

Due to their durable properties and low maintenance, glass tiles are a popular choice for both interior and exterior applications. They can be used to create a variety of different looks and are also a great accent piece.

A sparkling glass tile is a great choice for either a shower or a kitchen backsplash. It’s also more stain-resistant than other types of tile, and it can withstand acidic lemon juice and red wine. However, one disadvantage of glass tile is that it can crack and chip easily if an item is dropped on it, which makes it ideal for walls.

A glass tile in soft neutral tones is a great choice for a kitchen wall or a sleek and modern style that will make your space look bigger and brighter. You can choose a white or black glass subway tile for your wall or a more daring style with a stacked brick for your kitchen. Glass tile can be an excellent choice for any interior design project.

If you live in a landed property in Singapore with a swimming pool, you can elevate it with the help of glass tiles that are in either blue or green tones. These are great for creating a splash of color and enhancing the water’s reflections. For an elegant look, opt for a mosaic glass tile that’s made from small glass pieces.

4. Marble Tile

One of the most expensive types of natural stone tile is marble, which is known for its elegant and bold appearance. Due to its natural mineral lines and deep veins, marble can endure extremely high pressure and heat.

A marble tile can elevate a space to new heights. Its vibrant and intricate color veining and depth make it an ideal choice for any room. It can be made from various natural stone colors such as gray, green, beige, white, black, and more. When choosing marble slabs or tiles, make sure to inspect them for any rough areas to prevent staining.

Over the millennia, marble has been a popular building material. This natural stone, which is extracted from mountains all around the world, has been used in royal palaces for centuries. It’s regarded as one of the most lavish and beautiful building materials, and it requires more maintenance than other types of natural stone.

5. Granite Tile

Another natural stone tile that is commonly used in both flooring and countertops is granite, which has natural specks and vibrant colors that are often visible through its surface.

Compared to marble, granite is significantly harder and is less prone to cracks and chips. It’s also very waterproof, making it a great choice for areas that are prone to stains and moisture.

Unlike other types of materials, granite is not a budget-conscious material. It is an extremely resilient and durable material that can withstand the effects of high heat. It can be found in large format slabs.

The structure of this stone is crystalline, and it contains various minerals such as quartz, feldspar, and mica. These minerals create unique patterns and colors, and they are dispersed throughout the stone, which adds a sparkling and shimmering appearance.

The various regions where this natural stone comes from are known to produce high-quality tiles. These are available in a wide range of colors and have vibrant and intricate patterns. This material can be used in different areas such as interior and exterior design.

Benefits of Tiling Service

September 10, 2022 by admin

Benefits of Tiling Service

Tiling is an excellent method to enhance the beauty and value of your property.

Tiles come in various designs, colors, textures, and materials. They’re versatile enough to be used everywhere, from walls to ceilings, from bathrooms to kitchens.

Tiling is an art that demands accurate measurements, exceptional quality, and meticulous attention to detail. If you seek tile installation services, you should be aware of the many benefits of engaging the tiling service contractor.

Useful link: Carpenter Singapore

You will get all the benefits listed below from a tiling service:

1. Improve Durability

Tiles are more robust and can endure wear and tear than other types of flooring. They are not readily scratched and are stain-resistant. This means you won’t have to worry about your tiles being filthy or damaged due to normal usage.

2. Easy Cleaning

Cleaning tile is considerably simpler since it is smooth and does not have many grooves or gaps for debris to get lodged in, as other materials do. Because there aren’t many places for dirt to hide, your tiles will be simple to clean with simple soap and water.

3. Attractive Design

Tiling service is an excellent option to update the appearance of your bathroom, kitchen, or other space. You may get the required impression by selecting various tiles in various designs and sizes.

4. Less Expensive

Tiles are more cost-effective for flooring than other options, such as carpets or flooring made of hardwood. This is one of the primary reasons why they are gaining popularity not just among households but also among commercial establishments.

5. Increased Property Value

Installing a tiling service in your home can increase the value of your property since it will make your home more appealing and contemporary. This is particularly true if you utilize expensive tiles like granite or marble.

6. Better Living Conditions

A tiling service may assist you in creating an environmentally friendly atmosphere where everyone can enjoy spending time at home. You have a wide range of options for how to decorate each location, so you can always expect to see something different.

Homogeneous Tiles

July 8, 2022 by admin

What are Homogeneous Tiles?

Commercially available homogeneous tiles are often regarded as the most robust floor coverings. Due to the absence of color in these tiles, they are also known as porcelain tiles or unglazed porcelain tiles. The homogeneous tile, which is made of clay and specialized tiling materials, can withstand temperatures as high as 1500 degrees Celsius.

For this reason and because of the strength and water resistance they provide, homogeneous tiles are often utilized in tile installations and renovations. It is ideal to choose these tiles since they do not exhibit any evidence of chipping or wearing, unlike glazed tiles, which do.

8 Advantages of Using These Tiles

1. Ideal Design for Heavy-Footed Floors

There are a variety of uses for homogeneous tiles, which keeps them popular among architects and designers alike. Homogenous floor and wall surface tiles are often employed in public locations to cover the majority of their interior space.

The majority of designers also make use of these tiles in Singapore’s design of Housing & Development Board (HBD) residential flats.

2. Almost Impermeable Quality

Their nonporous and water-resistant nature has led to their widespread use. A homogeneous tile has a slower absorption rate than any porcelain tiles. Homogenous tiles are the ideal option for bathroom and kitchen tiling because of their impermeable qualities.

Shower floors are often covered with these smaller tiles squares, whereas kitchens typically utilize larger squares. Since homogeneous tile aid in efficient water drainage and flow, this is a common design choice.

3. Low Maintenance

Although granite and marble tiles offer benefits beyond homogeneous tiles, they have low maintenance. While they are more costly than most ceramic tiles, they are less expensive than natural stone tiles. As natural stone tiles need periodic polishing and sealing, installation and maintenance expenses are substantially reduced.

They need merely a thorough wiping and washing off to remove the accumulated moisture. The spacing between homogeneous tiles has to be specified by the tile manufacturer. This keeps the tile from coming out and extends its life, preventing future tile replacements.

4. Wide Variety of Options

Homogeneous tiles effectively match any style of indoor and outdoor designs, water-resistant and durable. Moreover, they are consistently proportioned, same qualities as porcelain and ceramic tiles.

5. Chemical Resistance

In contrast to granite and marble tile, which are not chemically resistant, homogeneous tiles may be cleaned hygienically using chemical treatments.

6. Stain Resistance

Because they are water-resistant and compact, the surface of homogenous tiles is easier to clean, making them ideal for kitchens and bathrooms.

7. Mechanically Powerful

Homogeneous tiles often have better mechanical strengths because they are more compact and denser, so they can endure considerable pressure and weight without breaking or chipping.

8. Slip Prevention

For improved slip resistance, homogeneous tiles should be installed in areas more likely to experience wet and moist surfaces. People like to utilize them in damp places, such as the bathroom and kitchen, due to their impermeable characteristics.

Natural stone, glazed, and glossy tiles, on the other hand, are slippery and should not be used in slippery places.

Wooden Tiles for Renovation in Singapore

July 3, 2022 by admin

Wooden Tiles For Renovation in Singapore

What are Wooden Tiles?

Wooden tiles are a type of flooring that is made from real wood, often bamboo. They are more durable than carpet and provide a sophisticated look for any room in the house. Unlike other types of hardwood floors, wooden tiles don’t require sanding or refinishing as often. In addition, it can be installed on any level surface.

In tiling service, some types of tiles that look like wood include panel, parquet, plank, parquet, and texture-printed tiles. For industrial buildings, floor painting with epoxy is another option.

8 Reasons to Choose Wooden Tiles

1. Durability

Wooden tiles are extremely durable. They can be installed on any level surface and can withstand heavy foot traffic. Unlike hardwood flooring, you do not have to refinish them as often, so you save time and money. This quality also makes them perfect for commercial spaces or high-traffic areas like hospitals or airports.

2. Natural look and feel

Wooden flooring has a natural look that is not available in many other types of hardwood flooring. It comes in a wide range of colors and grain patterns, which suit many different decors. Many people prefer wooden tiles because they don’t require sanding or refinishing, so they can be quickly installed and still maintain their quality.

3. Easy to clean

Wooden floors are very easy to clean. Just sweep regularly and use a damp mop once a week.

Wooden tiles are more durable than carpet, so they can withstand heavy foot traffic without wearing out easily. This makes them ideal for high-traffic areas like hospitals or airports that have busy lobbies.

4. Classy design

Wooden flooring comes in an array of colors and styles that can be used to create a more upscale décor. This can give any room a modern and sophisticated feel. They are considered a more natural alternative to carpet and are also very affordable, which means they can easily replace the carpet in any room.

5. Easy installation

Wooden tiles are very easy to install and come in many different shapes and sizes so they can be combined with other decor styles easily. They also come with a 30-year limited warranty and are moisture, scratch, and stain-resistant.

Wooden tiles can be quickly installed, making them an ideal choice for home improvement projects like bathroom remodeling.

6. Eco-friendly option

For homeowners who are concerned about the environment, wooden flooring is a perfect choice. They are made from bamboo or hardwood trees that need to be replanted after harvesting. This sustainable process means you get flooring that will last for years without damaging the environment.

Wooden tiles are a slower burning type of wood and they can be installed in any room, including the kitchen or bathroom. They do not produce as toxic fumes as other types of flooring, so they are safe for families with children or pets.

7. Good for commercial spaces

Some companies such as clinics and offices need flooring that can withstand heavy foot traffic, which wooden tiles can provide. They are very easy to install and come in a wide range of styles so they can be used in any room.

The hardwood look of wooden tiles creates an instant sense of class and sophistication, which makes them popular in commercial spaces. They are also very affordable, making them a good choice for high-traffic areas like airports, hotels, and hospitals.

8. Versatile style

Wooden floors come in a wide range of shapes that can be used with other types of décor, including other types of hardwood flooring. This means they can be combined with carpets to create a more natural look.

Many homeowners prefer wooden flooring because it has a natural look that is not available in most other types of flooring. The dense wood makes them durable and able to withstand heavy foot traffic. They can be used in many different rooms throughout the home, including the kitchen or bathroom.

Some people also choose wooden tiles because they are made from bamboo, which needs to be replanted after harvesting. This sustainable process makes it possible to maintain the environment while saving money on your home improvement project.

Choosing the Correct Tiles for Your Renovation?

While the tiling process is fun and it is a hobby for some homeowners, hiring an experienced tiling contractor can guarantee a perfect tiling service. Other than that, they do provide consultation on tiles selection according to your interior design.